Seat cover made of imitation leather for Citroen Jumper II, Peugeot Boxer, Fiat Ducato, 1 single seat at the front (recess for armrest on the right) & double bench
- Suitable for Citroen Jumper II 04/2006-Today, Peugeot Boxer 09/2005-Today, Fiat Ducato 07/2006-Today
- Made from synthetic leather - classic design
- Scope of Delivery: 1 single front seat cover with cut-out for right armrest, 1 double front bench cover, table cut-out, 3 headrest covers
€50.97
€59.96 (15% saved)
Ready for dispatch in 2-3 business days
Please contact our customer service, we will deal with your request as soon as possible.
- As a matter of course, our seat covers are ISOFIX compatible, so that you can continue to use the system in your vehicle, if available.
- CITROËN RELAY III Bus, 04/2006-
- CITROËN RELAY III Platform/Chassis, 04/2006-
- CITROËN RELAY III Van, 04/2006-
- FIAT DUCATO Bus (250_), 07/2006-
- FIAT DUCATO Van (250_), 07/2006-
- FIAT DUCATO Platform/Chassis (250_), 07/2006-
- PEUGEOT BOXER Bus, 09/2005-
- PEUGEOT BOXER Van, 04/2006-
- PEUGEOT BOXER Platform/Chassis, 04/2006-
- Citroen Jumper, Fiat Ducato and Peugeot Boxer virtually identical design;Opel Vivaro, Renault Trafic and Nissan Primastar identical design
Perfect fit
You want a seat cover that fits like the original, looks better and, moreover, will last a long time? Then we have just the right product for you! Our custom-made seat covers for your van are made of high quality Soft Nappa Artificial Leather material and fit perfectly to your car seat. The design is classically clean and therefore fits nicely into the overall picture of your car. Resulting, you protect your car seats from dirt and wear. Included in the scope of delivery: 1 single front seat cover with cut-out for right armrest, 1 double front bench cover, table cut-out, 3 headrest covers.
Assembly made easy!
The installation of the front seat cover is kept very simple and quick. After removing the headrest, simply pull the entire cover over the original seat. Then the seat cover can be attached under the seat with hooks and the fabric surrounding the pre-cut openings for the head rest can be plugged under the plastic mount. Therefore, the cover fits perfectly and cannot slip anymore.
For careful and gentle cleaning and care, we recommend hand washing at a maximum of 40°C in warm water using a coloured detergent.
Material Composition : Seat: 100% Polyvinyl Chloride (Polyurethan coated), Side/ Back Part: 100% Polyester (Polyurethan coated): 1,1940 kg
WALSER GmbH
Radetzkystraße 114
6845 Hohenems
Austria
office@walser-shop.com
Login
3 - 10 of 42 reviews
On: 19.06.2019
alles super geklappt vielen dank
Produckt ist gut, Preis Leistung ist auch gut
On: 30.04.2019
Wir haben diese Sitzbezüge nun schon zum 2. Mal bestellt und sind wieder sehr begeistert.
Tolle Sitzbezüge, robust und qualitativ sehr hochwertig. Das Preis-/Leistungsverhältnis ist einwandfrei.
On: 06.01.2019
Bin zufreiden mit der Bestellung.
Produkt entspricht den Erwartungen zu dem Preis.
On: 30.10.2018
passt nicht
passt nicht, keine Befestigungshaken, s'Geld nicht wert
On: 03.08.2018
Sehr schnelle Lieferung, sehr passgenau
Sehr schnelle Lieferung, sehr passgenau
On: 30.07.2018
Gerne wieder
Gute Qualität und Passform, gerne wieder
On: 02.06.2018
Gutes Produkt
Prima Schonbezüge. Einfach und schnell zu montieren. Leider fehlten die kleinen Hacken zum Befestigen der Laschen.
On: 16.02.2018
Top
Das Preis Leistungs Verhältnis ist super
On: 05.02.2018
Alles OK
Das Produkt entspricht unseren Erwartungen. Das Preis- Leistungsverhältnis passt.
On: 11.01.2018
gern wieder
entspricht voll und ganz meinen Vorstellungen